Huron LDAL048055 cleats

Produktnr. 1360058
Type LDAL048055
Dokumentasjon Åpne i nytt vindu


The Huron cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914 to ensure the securing and retention of cables, without sustaining damage to the cable(s). The range is fabricated from 5000 series aluminium and is available in 23 sizes to suit cable diameters 19mm to 128mm. The cleat has three M10 fixing clearance holes within one base, allowing versatility to the installer during installation to use either one M10 bolt or two M10 bolts, and is designed to enable the product to be secured to a variety of mounting surfaces. The Huron cable cleats hinge opens fully allowing the cables to be easily placed within the cable cleat to aid the installer before closing and securing via the mouth piece bolt. Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free. Features - Third party certification to IEC 61914 - 5000 series aluminium - 19 – 128mm in 23 sizes for trefoil formation/application - Short circuit rating of 84kA peak fault - Operating temperature -50°C to +60°C - Liners are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free - Combined single (M10) or two bolt (M10) fixing design